Free calculator · Roof

Roof pitch calculator

A roof that rises 6 in over 12 in is a 6/12 pitch: 26.6°, a 50% grade and a multiplier of 1.118.

How far it goes up
Level distance, usually 12 in
Measuring in the attic?
Hold a level on a rafter, mark 12 in along it, and measure straight up. That number is your rise.
Roof pitch· 6 in rise per 12 in
6/12pitch
26.6°
Angle
50%
Grade
×1.118
Area multiplier

Don’t know your size?Measure it from satellite.

Trace your roof on the satellite map, pick the pitch, and LandTape counts squares and bundles.

Download for iPhone
3-day free trial · Cancel anytime

Pitch chart

Most US homes are 4/12 to 9/12. Below 4/12 shingles need extra underlayment; below 2/12 they don’t work.

PitchAngleMultiplier
2/129.5°1.014
3/1214°1.031
4/1218.4°1.054
5/1222.6°1.083
6/1226.6°1.118
7/1230.3°1.158
8/1233.7°1.202
9/1236.9°1.250
10/1239.8°1.302
11/1242.5°1.357
12/1245°1.414

How to find your pitch

Three ways, from easiest to most exact.

  1. From the attic. Level against a rafter, mark 12 in, measure straight up to the rafter.

  2. From a ladder at the gable. Measure the height from the wall top to the peak and half the width of the house. Rise ÷ run × 12 is the pitch.

  3. With a phone. Lay the phone on a shingle and read the angle with a level app, then enter it under Angle.

How we calculate

Same math as the LandTape app.

6 in ÷ 12 in × 126/12
Angle = arctan(rise ÷ run)26.6°
Grade = rise ÷ run × 10050%
Multiplier = √(1 + (rise ÷ run)²)×1.118

Questions

Quick answers about roof pitch.

What does a 6/12 roof pitch mean?

The roof rises 6 inches for every 12 inches it runs horizontally. That’s an angle of 26.6° and a 50% grade.

How do I find my roof pitch without climbing up?

From the attic, hold a level against a rafter, mark 12 in along the level and measure straight up to the rafter. Or measure the rise and run of a gable end from the ground and divide.

What is the most common roof pitch?

Between 4/12 and 9/12 for most US houses. 6/12 is very common.

What is the minimum pitch for shingles?

2/12 with special double underlayment, and 4/12 for a standard install. Flatter roofs need membrane roofing.

What is a pitch multiplier?

The factor that turns a roof footprint into actual roof surface. It’s √(1 + (pitch ÷ 12)²): 1.118 for 6/12 and 1.414 for 12/12.

Scan to download

LandTape for iPhoneLandTape is on iPhone

Point your iPhone camera at the code. It opens the App Store.Open this link on your iPhone to download it. The calculators here stay free on any phone.