Free calculator · Land

Acreage calculator

A 100 by 200 ft lot is 20,000 sq ft, or 0.459 acres. One acre is 43,560 sq ft.

Lot size20,000 sq ft
Lot isn’t a rectangle?
Use Several parts to add rectangles and triangles, or subtract a corner.
Lot size
0.459acres
20,000sq ft
Square feet
0.186ha
Hectares
1,858m²
Square meters

Don’t know your size?Measure it from satellite.

Find the property on the satellite map, tap its corners, and LandTape shows the acreage.

Download for iPhone
3-day free trial · Cancel anytime

Common lot sizes

A quarter acre is 10,890 sq ft. Most suburban lots fall between a fifth and a half acre.

LotSizeAcres
Small city lot50 × 100 ft0.115
Typical suburban75 × 125 ft0.215
Quarter acreabout 104 × 104 ft0.250
Half acreabout 148 × 148 ft0.500
One acreabout 209 × 209 ft1.00

How to measure acreage

From the street, from the deed, or from above.

  1. Frontage × depth. Measure the lot along the street and back to the rear line, in feet, and multiply.

  2. Check the paperwork. Your deed, plat or county parcel viewer lists the recorded acreage and the lot’s dimensions.

  3. Or trace it from above. In LandTape, tap the lot’s corners on the satellite map. Odd shapes are fine.

How we calculate

Area in square feet divided by 43,560. Hectares use exact metric conversion.

Area20,000 sq ft
÷ 43,560 sq ft per acre0.459 ac
× 0.09290304 for square meters1,858 m²
÷ 10,000 for hectares0.186 ha

Questions

Quick answers about lot size.

How do I calculate acreage?

Multiply the lot’s length by its width in feet, then divide by 43,560. A 100 by 200 ft lot is 20,000 sq ft, or 0.46 acres.

How do I find the acreage of an odd-shaped lot?

Split it into rectangles and triangles and add them up, or trace the outline on a satellite map. The LandTape app does the tracing and gives you acres and square feet.

Is the acreage in a listing accurate?

Usually close, but listings round and sometimes include road easements. Your deed or plat has the recorded figure. A measurement from satellite is a good check, and a licensed surveyor is the only source for exact boundaries.

What is frontage times depth?

Frontage is the width along the street and depth runs back from it. Frontage × depth ÷ 43,560 gives acres for a rectangular lot.

How big is a typical house lot?

New single-family lots in the US are often around a fifth to a quarter of an acre, about 8,000 to 11,000 sq ft. Older and rural lots are often much larger.

Scan to download

LandTape for iPhoneLandTape is on iPhone

Point your iPhone camera at the code. It opens the App Store.Open this link on your iPhone to download it. The calculators here stay free on any phone.